NOTE: The standard button panel is NOT the smooth glass touch panel but a raised button panel with individual buttons controlling most features.
Starting a Session using the Button Panel:
Select the source you want to display (or hear).
*When you are done presenting, always shut down the system
Switching sources: Select a different source button at the top of the Touch Panel
*Make sure your source is powered on
Options: Select the appropriate button on the Button Panel, which may include Blank Screen, Mute, Freeze, **Camera selection (CAM 1/2).
For Blu-Ray controls: They are located at the bottom third of the button panel (including the arrow pad and select button).
Previewing a source from the monitor (Note: Does not change projector image): Hold any source for approximately 3 seconds.
Manual Projector Screen override: To raise and lower the projector screen:
Press the screen button. When no screen button is available, hold the Up and Down directional buttons for three seconds.
**If your classroom has 2 video cameras to choose from, look for the <CAM 1/2> button and press to toggle between the two cameras for connection to either one.
NOTE: if you do not see one or either of the cameras producing a connection signal, you can use this toggle button to wake up the cameras. Press the button once to toggle to the other camera then press again to return to the other camera. This should wake up the camera(s) signal(s).
Additional classroom resources:
PTZ Control - https://butleru.force.com/askbutler/s/article/How-Do-I-Control-a-PTZ-Camera-in-the-Classroom
Zoom - https://butleru.force.com/askbutler/s/article/Zoom-Insruction-Index
Butler A/V Info - https://butleru.force.com/askbutler/s/article/Classroom
